Bead and Sand Blasted Blade Finishes: What do you think?

#2

Goto Tenroads to know more.

Post by vivi » Tue Dec 05, 12:19 am

I refuse to purchase any bead blasted blades after rusting multiples bad within half a work day. And that was when I lived up north near the great lakes. Living on the SE coast I'd be lucky to have any blade left after a week :p

I think the primary reasons for using them are aesthetics and costs. I could be wrong but I think it is a cheaper finish to produce than DLC or a nice polish.

I asked Kershaw why they use them back around , and appearance was the reason I was provided with. I had a bead blasted Leek that rusted bad near the thumbstud and pivot area, and took it up to a grit polish to rectify that.

That was one of the main reasons I stopped buying their knives. I got sick of polishing the blades to make them perform as well as the steel should. Here's a photo of me working on a few Kershaws I used to own.



They also used primarily Ken Onion designs at the time, and he has a knack for putting the horn of the thumb ramp right where my thumb wants to go, which ruined the ergonomics of nearly every knife he made for me.

I do like how their 12C27 sharpened though. Took a very nice edge easily.

It has nothing to do with how well or how poorly they are done in my experience. Bead blasting a steel blade, by its nature, causes tons of little divots on the surface of the blade that act to trap moisture.I refuse to purchase any bead blasted blades after rusting multiples bad within half a work day. And that was when I lived up north near the great lakes. Living on the SE coast I'd be lucky to have any blade left after a week :pI think the primary reasons for using them are aesthetics and costs. I could be wrong but I think it is a cheaper finish to produce than DLC or a nice polish.I asked Kershaw why they use them back around , and appearance was the reason I was provided with. I had a bead blasted Leek that rusted bad near the thumbstud and pivot area, and took it up to a grit polish to rectify that.That was one of the main reasons I stopped buying their knives. I got sick of polishing the blades to make them perform as well as the steel should. Here's a photo of me working on a few Kershaws I used to own.They also used primarily Ken Onion designs at the time, and he has a knack for putting the horn of the thumb ramp right where my thumb wants to go, which ruined the ergonomics of nearly every knife he made for me.I do like how their 12C27 sharpened though. Took a very nice edge easily.

History & Definition

Defining Bead Blast Finish

The Bead Blast Finish is a surface finishing process that cleans, strengthens, and beautifies metal components. We accelerate delicate beads made of various materials at high speeds against the metal surface. This process removes surface imperfections and produces a matte, uniform finish. We use the latest equipment to ensure precision on every project and cater to our diverse clientele.

Bead Blast Finish: Evolution and History

Since its conception, the beadblast finish has evolved. It was developed in the middle of the 20th century to clean and polish industrial parts. The technology and equipment have evolved over the years to improve efficiency and application. Bead blasting has become an essential part of modern manufacturing. It ensures that parts meet high-quality standards in different industries.

The Significance of Bead Blast Finish

Bead blasting is a critical process in the modern manufacturing landscape. Not only does it improve the durability and performance of metal components, but it also plays a vital role in aesthetics. Bead blasting is used extensively in industries such as aerospace, automotive, and electronics, where appearance and precision are essential. Our clients like Jack Garcia highly value bead blasting.

An Overview of Bead Blast Finish Content

This comprehensive guide will cover the many aspects of bead-blasting. We cover everything from its benefits and applications to the equipment and maintenance practices. We want to give you helpful information that will help you better understand the importance of bead-blast finish in sheet metal fabrication. Let&#;s take this journey and discover the world of Shengen beadblast finish.

Grasping the Fundamentals of Bead Blast Finish

If you want to learn more, please visit our website bead blasted surface finish specification.

We at Shengen believe that knowledge is the key to excellence. This includes our readers and clients. Understanding the fundamentals of bead blast finishing is essential. Let&#;s explore the basics of this fascinating process.

What is Bead Blasting?

Bead blasting is a technique for surface finishing that involves hurling delicate beads at high speed onto a metal component. This process has multiple benefits: It cleans the surface and removes imperfections while leaving a uniform matte finish. Shengen&#;s expert team can handle various metal components and ensure each element receives the treatment.

Materials used in Bead Blasting

Bead blasting can be very versatile because we use various materials. The final finish is affected by the material we use. We choose it according to the requirements of the project.

Bead Types

Glass, ceramic, and plastic beads are just a few of the many types available. To clean parts without altering their dimensions, we use glass beads. Ceramic beads, which are more complex than glass beads, can be used to clean and prepare surfaces more aggressively.

Beads: Properties

Bead properties, like size, hardness, and shape, are crucial to bead blasting. We achieve the desired result by giving careful consideration to these factors. The smaller beads produce a more refined finish, while the larger beads have a more aggressive look.

Bead Blasting Equipment

We use the latest equipment at Shengen to ensure the accuracy and consistency of our bead-blasting process.

Types and Applications of Beadblasting Machines

Bead blasting machines come in different types, each with a specific application. There are two types of bead-blasting cabinets: pressure blast cabinets and vacuum blast cabinets. Suction blast cabinets have more control, while pressure blast cabinets are more aggressive.

How to Choose the Right Machine for You

A suitable machine for the job is essential. Shengen&#;s team evaluates each project to determine the needs, considering the material, the size, and the desired finish. Then, we select the best machine for optimal results.

Safety Measures

Shengen places safety as a priority. Safety is a top priority at Shengen. Our workforce is appropriately trained and provided with protective gear. Our facilities are built to the highest standards of safety, providing a safe and reliable working environment for both our employees and our clients.

The company is the world’s best glass bead 80 grit abrasive media supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.