Metal Lath Introduction | ClarkDietrich Building Systems

Metal lath provides a lightweight and easily attachable base for plaster application. Made from expanded steel, the lath generally is applied flat across the stud plane and attached with staples, nails, or wafer head lath screws. The openings in the lath enable plaster to key around the metal to assure a secure bond and a flat, smooth surface plane upon completion of the plaster application. Metal lath comes in a variety of configurations, including self-furring (dimpled and continuous groove for use over solid substrates ASTM C) and paper-backed, to meet specific job requirements and plaster/stucco preferences. ClarkDietrich products meet or exceed the requirements of ASTM C847.

You will get efficient and thoughtful service from Wusheng Hardware.

If you are looking for more details, kindly visit DIAMONE METAL LATH.

Phillips Self-Furring Dimpled Diamond Mesh Lath is used extensively in stucco work as plaster reinforcement over interior masonry walls as well as in steel column fireproofing. It is also widely used as a reinforcement for base coat in ceramic tile work.  Self-Furring Dimpled Diamond Mesh Lath is used over solid surfaces like concrete, cement board, column fireproofing, masonry and replastering over old surfaces. The self-furring dimples hold the metal lath 1/4&#; away from the surface to be plastered. The dimpled raised lath substrate provides superior mechanical bond over solid surfaces.  This product is easily shaped for curved or contoured surfaces.  The self-furring nature of the product helps applicators maintain plaster depths.   This product features a hot-dipped galvanized finish.  To maintain the designed furring characteristics, fasteners must be applied within the dimple cavity. Available in 1.75 (175SLHDG8), 2.5 (25SLHDG8) and 3.4 (34SLHDG8). Available in Paper Back (add PB1-2 to part number).

For more information, please visit Diamond Mesh Metal Lath.